inquiry form

Combined Air Dryers

The high-temperature high-humidity air from the compressor firstly exchanges heat in the precooler with the cold air from the evaporator for cooling and dehumidification. Then, the air enters the evaporator to exchange heat with the refrigerant. After this exchange, the air temperature is reduced to 2 to 10 ℃. Then, after the processing in the air-water separator, a large number of condensed water is discharged and dry air is obtained.

The air coming from the gas-water separator enters the precooler to exchange heat with the hot and humid air from the compressor. The compressed air from the cooling unit enters the efficient degreaser for oil removal. It then enters the desiccant dryer for water adsorption. Then, the compressed air with ultra-low dew point is obtained. After filtered, it is directly supplied to air consuming equipment.

In a limited space, our combined air dryers provide the cleanest compressed air with minimum air consumption.

Specification of No Heat Combined Air Dryer
Parameters Air handling
capacity
Compressor
power
Input
power
Cooling
water
Cooling water Inlet and
outlet
Machine net
weight
Length Width Height
Model (Nm3/min) (HP) (KW) Flow Pipe diameter Pipe diameter (kg) (mm)  (mm)  (mm) 
ZDA/W-108 10.8 3HP 3.15 1.2 G 1/2" DN50 680 1400 1200 2100
ZDA/W-145 14.5 3.5HP 3.3 1.5 G 1/2" DN50 800 1400 1200 2100
ZDA/W-165 16.5 4HP 3.4 1.8 G 1" DN65 920 1500 1400 2300
ZDA/W-195 19.5 5HP 4.9 3.2 G 1" DN65 1000 1500 1500 2300
ZDA/W-225 22.5 5HP 4.9 3.2 G 1" DN65 1000 1500 1500 2300
ZDA/W-285 28.5 5.75HP 5.3 3.5 G 1" DN80 1150 1800 1800 2100
ZDA/W-360 36 6HP 6.4 3.7 G 1" DN80 1380 1800 1800 2100
ZDA/W-430 43 7HP 7.2 4.8 G1 -1/2" DN100 1800 2000 2000 2350
ZDA/W-520 52 10HP 8.2 6.2 G1 -1/2" DN125 2250 2060 2100 2520
ZDA/W-630 63 12HP 9.5 7.8 G 2" DN125 2520 2060 2100 2520
ZDA/W-700 70 12HP 10.1 7.8 G 2" DN125 2800 2060 2100 2520
ZDA/W-800 80 16HP 12 10 G 2" DN125 3200 2800 3000 2800
ZDA/W-900 90 18HP 13.5 12 G 2" DN125 4000 2800 3100 2900
ZDA/W-1000 100 20HP 15 12.5 G 3" DN150 4950 2800 3100 2900
Specification of Micro Heat Combined Air Dryer
Parameters Air handling
capacity
Compressor
power
Input
power
Heater Cooling
water
Cooling
water
Inlet and
outlet
Machine net
weight
Length Width Height
Model (Nm3/min) (HP) (KW) (KW) Flow Pipe
diameter
Pipe
diameter
(kg) (mm) (mm) (mm)
ZDA/W-108X 10.8 3HP 3.15 3 1.2 G 1/2" DN50 730 1400 1200 2100
ZDA/W-145X 14.5 3.5HP 3.3 6 1.5 G 1/2" DN50 860 1400 1200 2100
ZDA/W-165X 16.5 4HP 3.4 6 1.8 G 1" DN65 1000 1500 1400 2300
ZDA/W-195X 19.5 5HP 4.9 6 3.2 G 1" DN65 1100 1500 1500 2300
ZDA/W-225X 22.5 5HP 4.9 6 3.2 G 1" DN65 1120 1500 1500 2300
ZDA/W-285X 28.5 5.75HP 5.3 9 3.5 G 1" DN80 1250 1800 1800 2100
ZDA/W-360X 36 6HP 6.4 9 3.7 G 1" DN80 1500 1800 1800 2100
ZDA/W-430X 43 7HP 7.2 12 4.8 G1 -1/2" DN100 1650 2000 2000 2350
ZDA/W-520X 52 10HP 8.2 15 6.2 G1 -1/2" DN125 2520 2060 2100 2520
ZDA/W-630X 63 12HP 9.5 18 7.8 G 2" DN125 2780 2060 2100 2520
ZDA/W-700X 70 12HP 10.1 24 7.8 G 2" DN125 3100 2060 2100 2520
ZDA/W-800X 80 16HP 12 27 10 G 2" DN125 3550 2800 3000 2800
ZDA/W-900X 90 18HP 13.5 27 12 G 2" DN125 4425 2800 3100 2900
ZDA/W-1000X 100 20HP 15 36 12.5 G 3" DN150 5450 2800 3100 2900

Use Conditions of Combined Air Dryer
1. Inlet temperature: 45℃, working pressure: 4-10bar, pressure drop: ≤0.3bar
2. Power supply: 380V/3P/50Hz

Related Names
Compressed Air Drying Equipment | Air Dehumidification Equipment | Air Compressor Water Filter

Inquiry Form